Adjustable Box Joint Jig

Perfect box joints every time? With this fully adjustable table saw jig, now it’s possible.

Accuracy — that’s the key to success for just about any jig, but particularly for a box joint jig. So the challenge was to come up with a design that eliminated as many variables as possible that could reduce accuracy. The solution was to “build in” the accuracy right from the start. Take the runner system, for example. Most box joint jigs are simply attached to a miter gauge. And if there’s any slop in your miter gauge bar, it can throw off the accuracy of the jig. But instead of using a miter gauge, this jig fits directly into the miter gauge slots of your table saw. The sides of the jig serve as runners. And since the jig travels in both slots, there isn’t any chance of racking.

SELECT YOUR PLAN PACKAGE

Unit

What You Get:

  • 6 printable (digital) pages of step-by-step instructions
  • 40 full-color photos, illustration and exploded views
  • Instructions for using the jig to make perfect joints
  • Shop-tested guarantee from Woodsmith and ShopNotes magazines

Product Recommendations

We don't have any links to project supplies and hardware for this particular project yet, but here are some other products that might be of interest to you. (We may receive commission when you use our affiliate links. However, this does not impact our recommendations.)

Double-Sided Tape

Hearing Protection

Kreg Top Trak Kit

Kreg Mini Trak