The convenience of a rolling
tool cabinet just can't be over looked. Roll it to your bench when you're
working there. Then roll it over to your assembly table. Your will tools
will always be right at hand.
This woodworking plan features three large drawers on top and a slide-out
shelf below for storing power tools. Our companion Craftsman
Tool Chest woodworking plan is also available at this web site.
This woodworking project plan appeared in ShopNotes No. 29.
CONSTRUCTION: The Rolling Tool Cabinet is 43-1/4" high x 32-1/4"
wide x 22-1/4" deep. The cabinet has a solid oak top, and frame and panel
sides and back, consisting of solid oak rails and stiles and oak plywood
panels. The drawers and shelf are mounted on full-extension slides. The
whole thing rolls around on 3" swivel casters.
WHAT YOU GET
7 pages of step-by-step instructions
 Full-color
photos and exploded views
Tool
setup illustrations
Shop
tips and techniques
All for only $5.95
How
to Buy this Plan
 Download
Plan to Your Computer
This woodworking plan is a downloadable PDF
file that you will save to your computer after you complete your order.
The file size is 1.8MB and will take 3-4 minutes @56Kbps to download.
You'll need Adobe's FREE
Acrobat® Reader 4.0 (or newer) installed on your computer to view
and print the pages of this plan. See order instructions as follows:
|
